For your wall stickers to stick properly and look great for long, you have to install them properly. Here are tips on how to properly install the units:
Ensure that the wall is properly prepared
As you might know, wall stickers don’t stick well on rough and dirty surfaces. If the surface is rough, you should smoothen it by sanding or using any of your other preferred methods. You should also clean the surface in order to get rid of dirt, oil and any other substances that might be there.
You should remove dirt using a damp sponge and use a little bit of soap to remove any oil that might be on the surface. After smoothening the surface leave it for sometime so that it can completely dry. In some cases you may be required to paint the wall before applying the sticker. If this is the case with you, ensure that the color that you use is the one that you would like for the background of the sticker.
Be cautious when applying the stickers
Wall stickers are installed solely for decorative purposes. This means that you have to be keen for you to pull off a great impression. To have an easy time, start by laying out your design and placement of the stickers. It’s recommended that you draw registration marks along the edges of the backing. The marks come in handy when placing the stickers on the wall.
Using a painter’s tape, attach the stickers to the wall. Apply the stickers with the backing intact to the wall. When arranging the units take your time to step away from the wall to see how they relate to each other. You should make the necessary adjustments until you are fully satisfied with the look.
When placing the units you should be keen. To avoid damage keenly remove the covering that protects the adhesive side of the sticker then religiously following your guidelines stick the sticker on your wall. For the unit to stick smoothen it with the side of your hand while pushing out air bubbles. In addition to doing this also rub across the sticker with a hard, flat object such a squeegee. This is to properly secure the sticker.
After you have installed the sticker, remove the top layer. If installing large stickers, the top layer can stick to itself which gives a bad look. To have an easy time ask a friend to help you with the installation.
Conclusion
This is a guide on how to properly install wall stickers. For a great look ensure that the stickers are of high quality. This calls for you to buy them from a reputable store.
